![Panasonic KX-TGD510HK Скачать руководство пользователя страница 35](http://html.mh-extra.com/html/panasonic/kx-tgd510hk/kx-tgd510hk_operating-instructions-manual_1509512035.webp)
Making/answering calls, intercom
Problem
Cause/solution
is displayed.
R
The handset is too far from the base unit. Move closer.
R
The base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
R
The handset is not registered to the base unit. Register it
(page 28).
R
Activating eco mode reduces the range of the base unit in
standby mode. If required, turn eco mode off (page 12).
Noise is heard, sound cuts
in and out.
R
You are using the handset or base unit in an area with high
electrical interference. Re-position the base unit and use the
handset away from sources of interference.
R
Move closer to the base unit.
R
If you use a DSL/ADSL service, we recommend connecting a
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.
Sound quality seems to be
getting worse.
R
You have registered a handset that is not recommended.The
clearest sound quality is only possible by registering the
provided handset.
The handset does not ring.
R
The ringer volume is turned off. Adjust ringer volume (page 13,
22).
R
Do not disturb mode is turned on. Turn it off (page 25).
R
If the handset is registered to multiple base units, the handset
may not be able to make or receive calls or communicate with
the base unit when the following conditions are met.
– Base unit selection is set to
“
Auto
”
(page 23).
In this case, place the handset near the base unit, then
press
M
R/ECO
N
and select
“
Eco
”
or
“
Eco Off
”
. Repeat
for each base unit.
I cannot make a call.
R
The dialling mode may be set incorrectly. Change the setting
(page 12).
R
You dialled a call restricted number (page 28).
R
The key lock feature is turned on. Turn it off (page 15).
Caller ID/Talking Caller ID
Problem
Cause/solution
Caller information is not
displayed.
R
You must subscribe to a Caller ID service. Contact your phone
service provider for details.
R
If your unit is connected to any additional telephone
equipment, remove and plug the unit directly into the wall jack.
R
If you use a DSL/ADSL service, we recommend connecting a
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.
Caller information is
displayed or announced
late.
R
Depending on your phone service provider, the unit may
display or announce the caller’s information at the 2nd ring or
later. Set the first ring to
“
Off
”
35
Useful Information
TGD51xHK(en-en)_0731_ver013.pdf 35
2019/07/31 17:21:42