*3 The preset melodies in this product are used with the following permission:
–
“
Ringtone 3
”
: © 2014 Copyrights Vision Inc.
–
“
Ringtone 4
”
-
“
Ringtone 15
”
: © 2012 Copyrights Vision Inc.
*4 If you do not want the unit to ring before the caller information is received, set to
“
Off
”
.
(Caller ID subscribers only)
You can only remove the first ring if the unit rings 2 times or more by default, which depends
on your phone service provider.
*5 This menu is not displayed when repeater mode is set to
“
On
”
.
*6 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*7 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*8 To prevent other users from joining your conversations with outside callers, turn this feature
on. (KX-TGC412)
*9 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
Alarm
An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R
Make sure the unit’s date and time setting
is correct (page 12).
1
M
N#720
2
MbN
: Select the desired alarm.
a
M
OK
N
3
MbN
: Select the desired alarm option.
a
M
OK
N
“
Off
”
Turns alarm off. Go to step 9.
“
Once
”
An alarm sounds once at the set time.
“
Daily
”
An alarm sounds daily at the set time.
Go to step 5.
“
Weekly
”
Alarm sounds weekly at the set time(s).
4
Proceed with the operation according to
your selection in step 3.
n
Once:
Enter the desired date and month.
a
M
OK
N
n
Weekly:
MbN
: Select the desired day of the week
and press
M N
.
a
M
OK
N
5
Set the desired time.
a
M
OK
N
6
Enter a text memo (10 characters max.).
a
M
OK
N
7
MbN
: Select the desired alarm tone.
a
M
OK
N
R
We recommend selecting a different
ringer tone from the one used for
outside calls.
8
MbN
: Select the desired snooze setting.
a
M
OK
N
9
M
OK
N
a
M
N
Note:
R
Press
M
N
to stop the alarm completely.
R
When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
R
Press any dial key or
M
N
to stop the
sound but keep the snooze function
activated.
R
If you want to make an outside call when
the snooze function is activated, please
21
Programming
TGC41xHK_(en-hk)_0622_ver001.pdf 21
22/6/2016 4:24:24 PM
