Panasonic KX-TGC212CX, Руководство по эксплуатации

Страница: 23 / 36

To erase a number:
M N a MbN : “ Yes ” a M OK N a M N
Note:
R When editing, press the desired dial key to
add,
M C N to erase.
Erasing all call block numbers
1
M N#217
2
MbN : “
Single Number
” or “
Range of
Numbers
” a M OK N
3
M N a MbN : “
Erase All
” a M OK N
4
MbN : “ Yes ” a M OK N
5
MbN : “
Yes
” a M OK N a M N
Other programming
Changing the handset name
Each handset can be given a customised
name (“Bob”, “Kitchen”, etc.). This is useful
when you make intercom calls between
handsets. You can also select whether or not
the handset name is displayed in standby
mode. The default setting is
“
No
” . If you select
“ Yes ” without entering any handset name,
“
Handset 1
” to “
Handset 2
” is displayed.
1
M N#104
2
Enter the desired name (10 characters
max.).
3
M OK N
4
MbN : Select the desired setting. a M OK N
2 times a M N
Storing an area code to be
deleted automatically
In some situations, phone numbers stored
automatically in the caller list (page 25) will
include area codes. If you do not want to dial
the area code when making calls from the
caller list, you can store the area code which
you want the unit to delete automatically.
Example: You have stored the area code
“123”. If you make a call from the caller list to
the phone number “123-456-7890”, the unit
dials “456-7890”.
1
M N#255
2
Enter an area code (5 digits max.). a
M OK N a M N
Call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1
M N#256
2
Enter the base unit PIN (default: “ 0000 ” ).
R If you forget your PIN, contact an
authorised service centre.
3
Select the handsets to be restricted by
pressing
1 to 2 .
R All handsets registered to the base unit
are displayed.
R “ ” is displayed next to the selected
handset numbers.
R To cancel a selected handset, press
the same dial key again. “ ”
disappears.
4
M OK N
5
Select a memory location by pressing 1
to 6 . a M OK N
6
Enter the phone number or area code to
be restricted (8 digits max.).
a M OK N a
M N
Changing the base unit PIN
Important:
R If you change the PIN (Personal
Identification Number), please make note of
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, contact
an authorised service centre.
1
M N#132
23
Programming
TGC2xxCX_(en)_0530_ver002.pdf 23 2014/05/30 15:36:24