Error messages
Display message
Cause/solution
Access # to VM service is
not stored
R
You have not stored the Voice Mail access number.
Store the number (page 35).
Base no power
or
No link. Re-connect base
AC adaptor.
R
The handset has lost communication with the base
unit. Move closer to the base unit and try again.
R
Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
R
The handset’s registration may have been cancelled.
Re-register the handset (page 26).
Busy
R
The called unit is in use.
R
Other units are in use and the system is busy. Try
again later.
R
The handset you are using is too far from the base
unit. Move closer and try again.
Check tel line
R
The supplied telephone line cord has not been
connected yet or not connected properly. Check the
connections (page 9).
Error!!
R
Recording was too short. Try again.
Invalid
R
There is no handset registered to the base unit
matching the handset number you entered.
R
The handset is not registered to the base unit.
Register the handset (page 26).
Requires subscription to
Caller ID.
R
You must subscribe to a Call Display service. Once
you receive caller information after subscribing to a
Call Display service, this message will not be
displayed.
Use rechargeable battery.
R
A wrong type of battery such as Alkaline or
Manganese was inserted. Use only the rechargeable
Ni-MH batteries noted on page 4, 6.
For assistance, visit www.panasonic.ca/english/support
37
Useful Information
TGC2xxC_(en_en)_0413_ver120.pdf 37
2015/04/13 11:54:43
