*6 The preset melodies in this product (
“
Tone 3
”
-
“
Tone 5
”
,
“
Melody 1
”
-
“
Melody 10
”
)
are used with permission of © 2012 Copyrights Vision Inc.
*7 If you subscribe to a Call Display service and want to view the caller’s information after lifting
up the handset to answer a call, turn off this feature.
*8 The flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*9 Generally, the line mode setting should not be changed. This setting automatically maintains
receiver volume at the proper level depending on the current telephone line condition. Set
the line mode to
“
A
”
if telephone line condition is not good.
Alarm
An alarm sounds at the set time for 3 minutes
once or daily. Alarm can be set for each
handset.
Important:
R
Make sure the unit’s date and time setting
is correct (page 13).
1
M
MENU
N#720
2
MbN
: Select the desired alarm option.
a
M
SELECT
N
“
Off
”
Turns alarm off. Go to
step 7.
“
Once
”
An alarm sounds once at
the set time.
“
Daily
”
An alarm sounds daily at
the set time. Go to step 4.
3
Enter the desired month and date.
a
M
OK
N
4
Set the desired time.
5
*
: Select
“
AM
”
or
“
PM
”
.
a
M
OK
N
6
MbN
: Select the desired alarm tone.
a
M
SELECT
N
R
We recommend selecting a different
ringer tone from the one used for
outside calls.
7
M
SELECT
N
a
M
OFF
N
Note:
R
To stop the alarm, press
M
OFF
N
or place
the handset on the base unit or charger.
R
When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
Night mode
Night mode allows you to select a period of
time during which the handset and/or base
unit will not ring for outside calls. This feature
is useful for time periods when you do not
want to be disturbed, for example, while
sleeping. Night mode can be set for each unit.
Important:
R
Make sure the unit’s date and time setting
is correct (page 13).
R
We recommend turning the base unit ringer
off (page 14) in addition to turning the night
mode on.
R
If you have set the alarm, the alarm sounds
even if the night mode is turned on.
Turning night mode on/off
1
M
MENU
N#238
2
MbN
: Select the desired setting.
a
M
SAVE
N
R
If you select
“
Off
”
, press
M
OFF
N
to
exit.
3
Enter the desired hour and minute you
wish to start this feature.
4
*
: Select
“
AM
”
or
“
PM
”
.
a
M
OK
N
5
Enter the desired hour and minute you
wish to end this feature.
6
*
: Select
“
AM
”
or
“
PM
”
.
7
M
SAVE
N
a
M
OFF
N
24
For assistance, visit www.panasonic.ca/english/support
Programming
TGC2xxC_(en_en)_0413_ver120.pdf 24
2015/04/13 11:54:43
