10
Preparation
Symbols used in these
operating instructions
Registering the cordless
camera
Register the cordless camera to a KX-
TG9120/KX-TG9140/KX-TG9150 base unit.
1
Base unit:
Press and hold
{x}
on the base unit for
about 3 seconds, until the registration
tone sounds.
2
Camera:
Press PROG. (program) on the back side
of the cordless camera with a pointed
object such as a pen until a beep sounds.
L
When registration is completed
successfully, the cordless camera
beeps and the indicator stops flashing
red but remains lit in yellow-green
(page 6).
L
If all registered handset start ringing in
step 2, press
{x}
to stop. Start again
from step 1.
Cancelling the cordless camera
Using a handset registered to the same
base unit, you can cancel the registration of
a registered cordless camera.
1
J
(centre of joystick)
i
L
i
L
2
Enter “
335
”.
3
“
Cancel Handset
”
i
L
4
Select the cordless camera you want to
cancel.
i
t
L
A
Q
is displayed with the selected item.
L
To cancel a selected item, select it
again.
i
t
5
L
i
“
Yes
”
i
L
L
“
Please Wait...
” will be displayed
and a long beep will sound.
6
{ih}
Symbol
Meaning
J
Press
J
(centre of joystick).
i
Proceed to the next operation.
L
Press
L
(centre of joystick).
“ ”
Select the words in quotations
shown on the display (e.g.,
“
Cancel Handset
”) by
pushing the joystick up or
down.
TGA914EX_1(e).book Page 10 Tuesday, August 8, 2006 2:21 PM
