8
Note:
• If you select a language you cannot read:
{ih}
i
"
i
N
i
#
i
{V}
2 times
i
#
i
{V}
3 times
i
#
i
{^}
/
{V}
: Select the desired
language.
i
#
i
{ih}
Registering the handset to the KX-TG8280 base unit
Ensure that the handset is switched on. If it is not on, press and hold
{ih}
for
few seconds to turn the handset on.
1
Lift the handset and press
{ih}
. Place the handset on the base unit.
• Continue the operation even when the handset display shows
“
Please Wait...
”
.
2
Press and hold
{
INTERCOM
}
on the base unit for about 3 seconds, until the
registration tone sounds.
3
With the handset still on the base unit, wait until a confirmation tone sounds
and
w
stops flashing.
Note:
• If an error tone sounds, or if
w
is still flashing, register the handset according
to the base unit’s operating instructions.
• If all registered handsets start ringing in step 2, press
{
INTERCOM
}
to stop.
Start again from step 1.
TGA828FX(fx).book Page 8 Tuesday, August 28, 2007 6:35 PM
