Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
7
Registering the handset to the KX-TG8070/KX-TG8090 base
unit
Make sure that the batteries are installed correctly.
1
Press and hold
{x}
on the base unit for about 5 seconds until a beep is heard.
• If all registered handsets start ringing, press
{x}
to stop, then repeat this
step.
• After a beep is heard, the rest of this procedure must be completed within 1
minute.
2
{
MENU
}
(right soft key)
i
r
i
{
OK
}
3
{^}
/
{V}
:
“
Registration
”
i
{
OK
}
4
{^}
/
{V}
:
“
Register Handset
”
i
{
OK
}
5
{^}
/
{V}
: Select a base unit number.
i
{
OK
}
• This number is used by the handset as a reference only.
• The registered base unit is indicated by “
@
”.
6
“
Enter PIN
”
is displayed. Enter the base unit PIN (default:
“
0000
”
).
i
{
OK
}
• If you forget your PIN, consult your nearest Panasonic service centre.
• When the handset has been registered successfully,
w
will stop flashing. If
the key tone is turned on, a confirmation tone will be heard.
Note:
• The KX-TG8070 does not feature an answering system.
• Answering system features are available only when this handset is registered
to the KX-TG8090.
Declaration of Conformity:
• Panasonic Communications Co., Ltd. declares that this equipment is in
compliance with the essential requirements and other relevant provisions of
Radio & Telecommunications Terminal Equipment (R&TTE) Directive
1999/5/EC.
Declarations of Conformity for the relevant Panasonic products described in
this manual are available for download by visiting:
http://www.doc.panasonic.de
Contact:
Panasonic Services Europe
a Division of Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, Germany
TGA807E(e).fm Page 7 Monday, April 16, 2007 6:17 PM
