– 4 –
L
The handset display may show
“
Please wait for 1 minute.
”
when the handset is placed on the charger if it is not registered to the
base unit.
L
If the batteries are fully charged, but the operating time seems to be
shorter, clean the battery ends (
S
,
T
) and the charge contacts with a
dry cloth and charge again.
Registering the handset to the base unit
Ensure that the handset is switched on. If it is not on, press and hold
{i
c
}
for few seconds to turn the handset on.
1
Handset:
Lift the handset and press
{i
c
}
.
2
Base unit:
Press and hold
{x}
for about 5 seconds, until the registration tone
sounds.
L
If all registered handsets start ringing, press the same button to
stop. Then repeat this step.
3
Handset:
Place the handset on the base unit.
L
Continue the operation even when the handset display shows
“
Please wait for 1 minute.
”
.
4
With the handset still on the base unit, wait until a confirmation tone
sounds and
w
is displayed.
Note:
L
If an error tone sounds, or if
_
is displayed, register the handset
according to the base unit’s operating instructions.
TGA750AZ(e).fm Page 4 Thursday, January 28, 2010 5:07 PM
