10
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
Preparation
Battery strength
Panasonic Ni-MH battery performance
(included batteries)
Note:
L
It is normal for batteries not to reach full
capacity at the initial charge. Maximum
battery performance is reached after a few
complete cycles of charge/discharge
(use).
L
Actual battery performance depends on a
combination of how often the handset is in
use and how often it is not in use
(standby).
L
Battery operating time may be shortened
over time depending on usage conditions
and ambient temperature.
L
Even after the handset is fully charged,
the handset can be left on the charger
without any ill effect on the batteries.
L
The battery strength may not be displayed
correctly after you replace the batteries. In
this case, place the handset on the
charger and charge for at least 7 hours.
Symbols used in these
operating instructions
Battery icon
Battery strength
5
High
6
Medium
7
Low
When flashing: Needs
to be charged.
Operation
Operating time
In continuous use
KX-TGA715:
12 hours max.
KX-TGA717:
10 hours max.
In continuous
standby mode
150 hours max.
Symbol
Meaning
{j
/OK
}
Press
{j
/OK
}
.
i
Proceed to the next
operation.
“ ”
Select the words in
quotations shown on the
display (e.g., “
Handset
Setup
”) by pressing
{^}
or
{V}
.
TGA715E_717E(e-e).book Page 10 Wednesday, August 2, 2006 2:46 PM
