R
Make sure that the wall and the fixing method are strong enough to support the
weight of the unit.
Battery installation/Battery charging
Important:
R
Use the supplied rechargeable batteries. For replacement, we recommend using
the Panasonic rechargeable batteries noted in the base unit’s operating
instructions.
R
Wipe the battery ends (
,
) with a dry cloth.
R
Avoid touching the battery ends (
,
) or the unit contacts.
R
Confirm correct polarities (
,
).
R
USE ONLY Ni-MH batteries AAA (R03) size.
R
Do NOT use Alkaline/Manganese/Ni-Cd batteries.
Charge for about 7 hours.
R
When the batteries are fully charged,
“
Fully charged
”
is displayed.
Rechargeable
Ni-MH ONLY
Confirm
“
Charging
”
is displayed.
Note:
R
When the language selection is displayed after installing the batteries for the first
time, you can select your desired language.
MbN
: Select the desired setting.
a
M
SAVE
N
a
M
OFF
N
R
If the batteries are fully charged, but the operating time seems to be shorter,
clean the battery ends (
,
) and the charge contacts with a dry cloth and
charge again.
Registering a handset to a base unit
1
Base unit:
Press and hold
M
LOCATOR
N
for about 5 seconds.
R
Depending on the base unit, a registration tone sounds.
R
If all registered handsets start ringing, press
M
LOCATOR
N
again to stop,
then repeat this step.
3
Installation
TGA680C(en)_1122_ver002.pdf 3
2012/11/22 14:26:23
