– 3 –
For assistance, please call: 1-800-211-PANA(7262)
Registration
This cordless handset, KX-TGA650, must be registered to a KX-TG6500/KX-TG6502/
KX-FG6550 base unit. The handset will be assigned the extension number at registration.
Only one handset can be registered at a time.
Charge the battery fully. Make sure the
base unit and the other handsets are not being used. Have both the handset and base
unit nearby during registration.
•
Base unit model shown here is KX-TG6500/KX-TG6502.
The handset display shows the instructions as shown on the
right.
•
The registered number “
[1]
” to “
[4]
” is shown on the top right of the display.
•
You can stop registration by pressing
[OFF]
on the handset and pressing
[LOCATOR/
INTERCOM/TRANSFER]
on the base unit.
•
Do not try to register KX-TGA650 to a KX-TG5200/KX-TG5202/KX-TG5210/KX-TG5212/
KX-TG5230/KX-TG5240/KX-TG5243/KX-FPG391 base unit. If you do, “
Wrong handset
Refer to manual
” will be displayed. The correct base unit for this handset KX-TGA650
is KX-TG6500/KX-TG6502/KX-FG6550.
1
Base unit:
Press and hold
[LOCATOR/INTERCOM/TRANSFER]
for 3 seconds.
•
On the KX-TG6500/KX-TG6502, the CHARGE indicator flashes. After the CHARGE
indicator starts flashing, the rest of the procedure must be completed within 1 minute.
•
On the KX-FG6550, “
HS REGISTRATION
” is displayed. The rest of the procedure
must be completed within 1 minute.
2
Handset:
(1) Press the soft key (
).
(2) Wait until a long beep sounds and the display
shows the new extension number.
•
Registration is complete.
To cancel the handset registration, please see your base unit Operating Instructions.
OK
OK
BACK
BACK
CHARGE Indicator
[LOCATOR/INTERCOM/
TRANSFER]
To operate “
”,
press the right soft key.
O K
1
Press LOCATOR
on base unit
for 3 sec.
Then press OK
[-]
L
Press LOCATOR
on base unit
for 3 sec.
Then press OK
L
BACK
PLAY
O K
O K
SP
I
PRIVACY
1
Handset
Registering
IN USE
[-]
SP
I
PRIVACY
1
Handset [2]
Registered
IN USE
[2]
Ex. Extension number 2
TGA650.fm Page 3 Wednesday, July 13, 2005 3:16 PM