Useful Information
19
Mounting the cordless camera on the wall
Standard mounting
Upside down mounting
L
The image may be seen upside down when mounting upside down. To compensate for
this, change the cordless camera setting to display images upside down (page 11).
1
Drive the screws (not included) into the
wall at a recommended height of 1.8 m
or below using the wall mount template
as a guide (page 20).
2
Mount the cordless camera (
A
), then
slide it down (
B
) and to the right (
C
)
until it is secure.
L
To aim the camera lens, see page
10.
1
Drive the screws (not included) into the
wall at a recommended height of 1.8 m
or below using the wall mount template
as a guide (page 20).
2
Mount the cordless camera (
A
), then
slide it down (
B
) and to the left (
C
)
until it is secure.
Screws
50.8 mm
(230–240 V AC, 50/60 Hz)
A
B
C
Screws
50.8 mm
(230–240 V AC,
50/60 Hz)
A
B
C
TGA593AL(e).book Page 19 Thursday, April 20, 2006 3:01 PM
