4
Using the Alarms
Section 4
The charger unit features an alarm clock. You can set the alarm to
play the radio or to sound a buzzer at a set time.
The radio alarm and the buzzer alarm can be set separately.
For assistance, please call: 1-800-211-PANA(7262)
[OFF]
[-, TUNE/CLOCK]
[AM/FM, RADIO]
Memory Buttons (
[M1]
,
[M2]
,
[M3]
,
[M4]
and
[M5]
)
[SNOOZE/MUTE]
[RADIO, ALARM DISPLAY/SET]
[BUZZER, ALARM DISPLAY/SET]
VOLUME
Control
[+, TUNE/CLOCK]
4-A Setting the Radio Alarm
1
Press
[AM/FM, RADIO]
to turn the radio on.
2
Press
[AM/FM, RADIO]
to switch between AM and FM.
3
Tune in to the desired station by pressing
[–, TUNE/CLOCK]
or
[+, TUNE/CLOCK]
.
OR
Press the desired memory button (
[M1]
to
[M5]
).
4
Adjust the volume by using the VOLUME control.
5
Press and hold
[RADIO, ALARM
DISPLAY/SET]
(the button on the top of
the unit) until the time flashes.
6
Set the alarm time by pressing
[–, TUNE/CLOCK]
or
[+, TUNE/CLOCK]
.
•
Pressing and holding
[–]
or
[+]
changes
the time faster.
7
Press and release
[RADIO, ALARM DISPLAY/SET]
to save the
radio alarm time and the station.
•
The time stops flashing and returns to the current time.
•
“
” is displayed while the radio alarm is turned on.
8
Press
[OFF]
to turn the radio off.
•
The radio will automatically turn on at the set time and will turn off
after 1 hour.
•
You can exit alarm setting mode any time by pressing
[OFF]
.
•
The
buzzer will sound at the set radio alarm time if you did not turn
the radio on in step 1.
•
To change only the radio alarm time
, repeat steps 5 to 7.
•
If a power failure occurs, the radio alarm time and station preset will
be retained for
about 10 minutes.
To confirm the radio alarm time and station:
Press and release
[RADIO, ALARM DISPLAY/SET]
.
•
The alarm time and the station will be displayed for about 3 seconds.
To stop the alarm temporarily (SNOOZE)
Press
[SNOOZE/MUTE]
.
•
The alarm will then start again in 6 minutes. You can press
[SNOOZE/MUTE]
again to stop the alarm.
To stop the alarm for the day
Press
[OFF]
.
•
The setting remains and the alarm will sound daily until you stop
the alarm completely. “
” and/or “
” will remain on
the display.
To stop the alarm completely
1. While the alarm is sounding or the SNOOZE mode is on, press
[OFF]
, then follow step 2.
OR
If the alarm is not sounding or the SNOOZE mode is not used, go
to step 2.
2. Press
[RADIO, ALARM ON/OFF]
or
[BUZZER, ALARM ON/OFF]
to turn the alarm off.
•
“
” or “
” disappears from the display.
•
To turn the alarm on again
, press
[RADIO, ALARM ON/OFF]
or
[BUZZER, ALARM ON/OFF]
.
4-B Setting the Buzzer Alarm
1
Press and hold
[BUZZER, ALARM
DISPLAY/SET]
(the button on the top of
the unit) until the time flashes.
2
Set the alarm time by pressing
[–, TUNE/CLOCK]
or
[+, TUNE/CLOCK]
.
•
Pressing and holding
[–]
or
[+]
changes the time faster.
3
Press and release
[BUZZER, ALARM DISPLAY/SET]
to save
the buzzer alarm time.
•
The time stops flashing and returns to the current time.
•
“
” is displayed while the buzzer alarm is turned on.
•
The buzzer will start at the set time and will automatically stop
after 10 minutes.
•
You can exit alarm setting mode any time by pressing
[OFF]
.
•
If a power failure occurs, the buzzer alarm time will be retained for
about 10 minutes.
To confirm the buzzer alarm time:
Press and release
[BUZZER, ALARM DISPLAY/SET]
.
•
The alarm time will be displayed for about 3 seconds.
[OFF]
[RADIO, ALARM ON/OFF]
[BUZZER, ALARM ON/OFF]
[SNOOZE/MUTE]
4-C Stopping the Alarm
When the alarm sounds at the set time, “
” is displayed and
“
” and/or “
” flashes.
