– 4 –
Link to cell
You can use the unit to make or answer calls using a cellular line. Your cellular phones must have
Bluetooth
®
wireless technology that is compatible with this product. For more details, please visit our Web
site: http://www.panasonic.com/link2cell
L
Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a
cellular call, you may hear noise. For best performance, we recommend placing the cellular phone
between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
1
Cell line
2
Cell phone service providers
Pairing a Bluetooth cellular phone (Handset/Base unit)
1
For CELL 1:
{
MENU
}
(
6241
For CELL 2:
{
MENU
}
(
6242
For CELL 3:
{
MENU
}
(
6243
For CELL 4:
{
MENU
}
(
6244
L
After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must
be completed within 5 minutes.
2
Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter
the pairing mode.
L
Depending on your cellular phone, it may ask you to enter the base unit PIN (default:
“
0000
”
).
3
Wait until a long beep sounds.
L
It may take more than 10 seconds to complete pairing.
L
When the CELL indicator lights up, the cellular phone is connected to the base unit. You are ready to
make cellular calls.
4
Proceed with the operation for your unit.
Handset:
{
OFF
}
Base unit:
{
EXIT
}
Note:
L
Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular
phone’s operating instructions.
Trademarks
L
The Bluetooth
®
word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by
Panasonic Corporation is under license. All other trademarks identified herein are the property of their
respective owners.
1
2
TG954x_(en)_QG.fm Page 4 Thursday, June 27, 2013 4:13 PM
