Panasonic KX-TG9381, Руководство по эксплуатации

Страница: 48 / 72

Using Bluetooth devices
48
For assistance, please visit http://www.panasonic.com/help
Using a Bluetooth wireless
headset (optional)
By registering a Bluetooth headset to the base
unit, you can have a hands-free conversation
wirelessly.
Important:
L
Up to 2 headsets can be registered to the base
unit. However, only 1 Bluetooth headset can be
used at a time.
L
For best performance, we recommend using a
Bluetooth headset within 1 m (3.3 feet) of the
base unit. A headset can communicate with the
base unit within a range of approximately 10 m
(33 feet).
Registering a headset
1
Your headset:
Set your headset to registration mode.
L
Refer to your headset operating
instructions.
2
Base unit:
{
MENU
}
i
{#}{
6
}{
2
}{
3
}
i
{V}
/
{^}
: “
Add
new device
” i
{
SELECT
}
3
Base unit:
Enter your headset PIN.
L
Typically, default PIN is “
0000
” . Refer to
your headset operating instructions.
4
Base unit:
{
OK
}
L
When registration is complete, ] is
displayed. You are ready to use the
headset.
Note:
L
When you register a 2nd headset, the 1st
registered headset is disconnected from the
base unit. To use the 1st registered headset,
change the headset connection. See “Changing
the headset connection (when 2 headsets are
registered)”, page 48.
Reconnecting a headset
If ] is not displayed even when the headset is
turned on, the headset has been disconnected
from the base unit. Reconnect the headset.
Important:
L
Make sure that the headset is turned on.
1
{
MENU
}
i
{#}{
6
}{
2
}{
3
}
2
{V} / {^} : Select the headset indicated by “
Q
”.
i
{ MENU }
3
{V}
/
{^}
: “
Connect
” i
{
SELECT
}
L
]
is displayed.
4
{
■
}
(EXIT)
Disconnecting a headset from the base unit
(when using a headset with another Bluetooth
device)
To use your headset with another Bluetooth device
such as a cellular phone, you may need to
disconnect the headset from the base unit.
1
{
MENU
}
i
{#}{
6
}{
2
}{
3
}
2
{V}
/
{^}
: Select the headset indicated by “
Q
”.
i
{
MENU
}
3
{V}
/
{^}
: “
Disconnect
” i
{
SELECT
}
L
]
disappears from the display.
4
{
■
}
(EXIT)
Changing the headset connection (when 2
headsets are registered)
Only 1 headset can be used at a time. If the
headset you want to use is not connected to the
base unit, change the connection to that headset.
Important:
L Make sure that the headset is turned on.
1
{
MENU
}
i
{#}{
6
}{
2
}{
3
}
2
{V}
/
{^}
: Select the desired headset. i
{
SELECT
}
L
The selected headset is indicated by “
Q
”.
L
]
is displayed.
3
{
■
}
(EXIT)
[
Base unit
[
Base unit
[
Base unit
TG938x(e).book Page 48 Friday, July 3, 2009 10:10 AM