
Using Bluetooth devices
57
Helpline Tel. No.: U.K. 0844 844 3898 Ireland 01289 8333
Panasonic Ni-MH battery
performance during use of a
Bluetooth headset
When the batteries are fully charged,
operating time of the handset using a
Bluetooth headset varies depending on
usage.
– Continuous use of the headset: 5
hours max.
– Not in use: 50 hours max.
Important:
L
If you do not use a Bluetooth headset,
it is better to turn off the Bluetooth
setting to save the battery life of your
handset (page 55).
Registering a headset to a
handset
Important:
L
Make sure that the Bluetooth headset
is not connected to any other
Bluetooth device.
1
Your headset:
Set your headset to registration
mode.
L
Refer to your headset operating
instructions.
2
Handset:
1
(middle soft key)
(
621
3
Enter your headset PIN.
L
Typically, default PIN is
“
0000
”
.
Refer to your headset operating
instructions.
4
Press
M
, then wait until a long
beep sounds.
L
When registration is complete,
g
is displayed. You are ready to use
the headset.
Connecting/disconnecting a
headset
If you cannot connect the headset and
handset by using the headset, you can
connect by using the handset. To use
your headset with another Bluetooth
device such as a mobile phone, you may
need to disconnect it from the handset.
Important:
L
Make sure that the headset is turned
on.
1
1
(middle soft key)
(
622
L
A long beep sounds.
2
{i
c
}
Note:
L
By turning the headset on, it may
connect to the handset automatically.
In addition, if the headset
automatically connects to an outside
line, press
{i
c
}
on the handset to
hang up.
Deregistering a headset
A handset can cancel a registration of a
Bluetooth headset.
1
1
(middle soft key)
(
134
2
{
r
}
:
“
Yes
”
s
M
L
After the headset is deregistered,
the handset beeps and
“
Add new
device
”
is displayed.
3
{i
c
}
Operating a Bluetooth
wireless headset
You can operate the call with your
headset even if you place the handset
on the charger during a call. If you place
the handset on the charger while
listening to recorded messages, the unit
stops message playback and the display
returns to standby mode.
TG862xE(e).book Page 57 Thursday, March 17, 2011 11:40 AM