Getting Started
16
Screen saver mode
The backlight goes dark when on a
call or turns off completely after 1
minute of inactivity
if the handset is not
on the base unit or charger.
Activate the handset display again by:
– pushing the joystick left
{
<
}
or right
{
>
}
when on a call.
– pressing
{ih}
at all other times.
Turning the power
on/off
Power on
Press
{ih}
for about 1 second.
Power off
Press
{ih}
for about 2 seconds.
Initial settings
Region settings
You can set the unit to use settings that
match your country (page 31). The
display language and other settings will
change accordingly.
Note:
L
The display language only changes
(to the selected country’s default
setting) for the handset used to select
the region setting. You must change
the display language for all other
handsets separately.
Display language
16 display languages are available.
1
1
(centre of joystick)
i
N
i
M
2
{V}
/
{^}
:
“
Display Setup
”
i
M
3
{V}
/
{^}
:
“
Language
”
i
M
4
{V}
/
{^}
: Select your desired
language.
i
M
i
{ih}
Note:
L
If you select a language you cannot
read:
{ih}
i
1
i
N
i
M
i
Push the joystick down 2 times.
i
M
i
Push the joystick down 5
times.
i
M
i
{V}
/
{^}
: Select
your desired language.
i
M
i
{ih}
!
"
Base Unit Setup
#
$
Caller Barred
*1 KX-TG8411/KX-TG8412
*2 KX-TG8421
Symbol meaning:
Example:
{V}
/
{^}
:
“
Off
”
Push the joystick down or up to
select the words in quotations.
Icon
Feature
Important:
L
When the language selection is
displayed after installing the
batteries for the first time, perform
step 4.
TG8411-8421FX(e).book Page 16 Tuesday, March 3, 2009 2:54 PM
