Panasonic KX-TG8201CB, Руководство по обслуживанию

Страница: 61 / 87

61
KX-TG8201CB/KX-TG8202CB/KX-TGA820CB
11.6. Things to Do after Replacing IC or X'tal
Cautions:
Some of the content on this page may not apply to models from some countries. The contents below are the minimum adjust-
ments required for operation.
11.6.1. Base Unit
Before making the following adjustment, ensure you have carried out PC Setting (P.54) in The Setting Method of JIG (Base
Unit) .
Note:
(*1) Refer to Check Point (Base Unit) (P.44)
11.6.2. Handset
Before making the following adjustment, ensure you have carried out PC Setting (P.58) in The Setting Method of JIG (Hand-
set) .
Note:
(*2) Refer to Check Point (Handset) (P.44)
Items Necessary Adjustment
BBIC
(IC7) Programs for Voice processing, interface for RF and
EEPROM 1. Clock adjustment: Refer to Check Point (D). (*1)
EEPROM
(IC5) Adjustment parameter data
(country version batch file, default batch file, etc.)
X'tal (X1) System clock
Items Necessary Adjustment
BBIC
(IC1) Programs for Voice processing, interface for RF and
EEPROM 1. Clock adjustment: Refer to Check Point (F). (*2)
2. 1.8 V setting and battery low detection: Refer to Check
Point (A), (B) and (C). (*2)
EEPROM
(IC3) Adjustment parameter data
(country version batch file, default batch file, etc.)
X'tal (X1) System clock