Programming
28
4
{
r
}
: Select the desired setting.
s
{
OK
}
2
times
5
{
OFF
}
Call block (Call Display
subscribers only)
This feature allows the unit to reject calls
when:
– the unit receives a call from a phone
number stored in the call block list as
unwanted (“Storing unwanted callers”, page
28).
– the unit receives a call without phone
number (“Blocking incoming calls without
phone number”, page 28).
When a call is received, the unit rings for a
short time while the caller is being identified. If
the phone number matches an entry in the call
block list, the unit sends out a busy tone to the
caller, and then disconnects the call.
Important:
L
When the unit receives a call from a number
that is stored in the call block list or a call
without a recognized phone number, the
call is logged in the caller list (page 30) with
$
after the call is disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in the
call block list.
Important:
L
We recommend storing 10 digits (including
an area code). If only 7 digits are stored, all
numbers that have the same last 7 digits will
be blocked.
■
From the caller list:
1
{
3
}
CID
2
{
r
}
: Select the entry to be blocked.
s
{
OK
}
L
To edit the number, press
{
EDIT
}
repeatedly until the phone number
is shown in the 10-digit format.
3
{
SAVE
}
4
{
r
}
:
“
Call block
”
s
{
OK
}
5
{
r
}
:
“
Yes
”
s
{
OK
}
6
Edit the phone number if necessary
(24 digits max.).
7
{
OK
}
s
{
OFF
}
■
By entering phone numbers:
1
{
MENU
}
(middle soft key)
y
217
s
{
ADD
}
2
Enter the phone number (24 digits
max.).
L
To erase a digit, press
{
CLEAR
}
.
3
{
OK
}
s
{
OFF
}
Blocking incoming calls without
phone number
You can reject a call when no phone number is
provided, such as a call just showing
“
Unavailable Name & No.
”
.
1
{
MENU
}
(middle soft key)
y
24
z
2
{
r
}
: Select the desired setting.
s
{
OK
}
s
{
OFF
}
Viewing/editing/erasing call block
numbers
1
{
MENU
}
(middle soft key)
y
217
2
{
r
}
: Select the desired entry.
L
To exit, press
{
OFF
}
.
3
To edit a number:
{
EDIT
}
s
Edit the phone number.
s
{
OK
}
s
{
OFF
}
To erase a number:
{
ERASE
}
s
{
r
}
:
“
Yes
”
s
{
OK
}
s
{
OFF
}
Note:
L
When editing, press the desired dial key to
add,
{
CLEAR
}
to erase.
L
When viewing,
“
Block w/o num
”
is
displayed if the blocking incoming calls
without phone number feature is turned on.
To turn the feature off:
{
ERASE
}
s
{V}
s
{
OK
}
s
{
OFF
}
TG80xxC(e).book Page 28 Friday, June 10, 2011 2:06 PM
