Programming
30
Helpline Tel. No.: U.K. 0844 844 3898 Ireland 01289 8333
3
To edit a number:
~
s
Edit the phone number.
s
M
s
{i
c
}
To erase a number:
W
s
{
r
}
:
“
Yes
”
s
M
s
{i
c
}
Note:
L
When editing, press the desired dial key to
add,
^
to erase.
Setting call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1
1
(middle soft key)
(
256
2
Enter the base unit PIN (default:
“
0000
”
).
L
If you forget your PIN, see page 45.
3
{
r
}
: Select the handsets to be restricted.
s
t
L
All handsets registered to the base unit
are displayed.
L
“
Q
” is displayed next to the selected
handset numbers.
L
To cancel a selected handset, press
t
again. “
Q
” disappears.
4
M
5
{
r
}
: Select a memory location.
s
M
6
Enter the phone number or area code to
be restricted (8 digits max.).
s
M
s
{i
c
}
L
To erase a restricted number, press
^
.
Note:
L
You can also select a memory location in
step 5 as follows:
Press
1
to
6
.
s
M
Changing the base unit PIN
(Personal Identification Number)
Important:
L
If you change the PIN, please make note of
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, see page
45.
1
1
(middle soft key)
(
132
2
Enter the current 4-digit base unit PIN
(default:
“
0000
”
).
3
Enter the new 4-digit base unit PIN.
s
M
s
{i
c
}
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the base
unit.
Important:
L
The additional handset model
recommended for use with this unit is noted
on page 5. If another handset model is
used, certain operations (handset settings,
base unit settings, etc.) may not be
available.
Registering a handset to the base
unit
The supplied handset and base unit are pre-
registered. If for some reason the handset is
not registered to the base unit (for example,
_
is displayed even when the handset is near the
base unit), re-register the handset.
1
Handset:
1
(middle soft key)
(
13
)
2
Base unit:
Proceed with the operation for your
model.
■
KX-TG8051
Press and hold
{x}
for about 5
seconds. (No registration tone)
■
KX-TG8061/KX-TG8062/KX-TG8063
Press and hold
{x}
for about 5
seconds, until the registration tone
sounds.
L
If all registered handsets start ringing,
press
{x}
again to stop, then repeat
this step.
TG8051_8061E(e).book Page 30 Monday, January 24, 2011 4:37 PM
