Panasonic KX-TG8021BXS Скачать руководство пользователя страница 32

Страница: 32 / 101

KX-TG8021BXS/KX-TG8021BXT/KX-TGA800BXS/KX-TGA800BXT

8.3.

How to Clear User Setting

Units are reset to the Factory settings by this operation (Erase recorded Voice messages*, stored Phone numbers, Caller list
and etc.)

Note:

• Some menus are not reset. Refer to

Operating Instructions

(P.19).

• The reset menus differ depending on the following operations.
•

This operation should not be performed for a usual repair.

* KX-TG8021 only

8.3.1.

Resetting both base unit and handset

Both the base unit and the registered handset which you did the following steps

are reset. Other registered handsets

will not be reset.

Note:

(*1) Refer to

Registering a Handset to a Base Unit

(P.20).

8.3.2.

Resetting only handset

The only handset is reset by doing the following steps

Note:

(*2)

• The handset registration to the base unit is cancelled.
• If the handset needs to be registered to the base unit, refer to

Registering a Handset to a Base Unit

(P.20).

• If users do not bring the base unit with them, the registration procedure has to be done by users themselves.

Содержание KX-TG8021BXS






































































































Результаты поиска

Содержание KX-TG8021BXS

Отзывы:

Похожие инструкции для KX-TG8021BXS

Бренды по названию

Популярные бренды

Panasonic KX-TG8021BXS, Руководство по обслуживанию

Результаты поиска

Содержание KX-TG8021BXS

Отзывы:

Похожие инструкции для KX-TG8021BXS

Бренды по названию

Популярные бренды