Panasonic KX-TG8011MES Скачать руководство пользователя страница 27

Страница: 27 / 85

KX-TG8011MES/KX-TGA800MES

8.2.

How to Clear User Setting

Units are reset to the Factory settings by this operation (Erase

stored Phone numbers, Caller list and etc.)

Note:

• Some menus are not reset. Refer to

Operating Instructions

(P.17).

• The reset menus differ depending on the following operations.
•

This operation should not be performed for a usual repair.

8.2.1.

Resetting both base unit and handset

Both the base unit and the registered handset which you did the following steps

are reset. Other registered handsets

will not be reset.

Note:

(*1) Refer to

Registering a Handset to a Base Unit

(P.18).

8.2.2.

Resetting only handset

The only handset is reset by doing the following steps

Note:

(*2)

• The registration of the base unit and the handset are cancelled.
• If the handset needs to be registered to the base unit, refer to

Registering a Handset to a Base Unit

(P.18).

• If users do not bring the base unit with them, the registration procedure has to be done by users themselves.

Содержание KX-TG8011MES






















































































Результаты поиска

Содержание KX-TG8011MES

Отзывы:

Бренды по названию

Популярные бренды

Panasonic KX-TG8011MES, Руководство по обслуживанию

Результаты поиска

Содержание KX-TG8011MES

Отзывы:

Бренды по названию

Популярные бренды