Problem
Cause/solution
I cannot connect my headset to
the base unit.
R
Confirm that your headset is turned on.
R
If your headset is already connected to another Bluetooth
device such as your cellular phone, disconnect the
headset from your cellular phone, then perform the
connecting procedure from the base unit.
R
If someone is using a cellular line, you cannot connect the
headset. There can be only one active Bluetooth
connection at a time.
R
The headset has not been paired to the base unit. Pair
the headset (page 54).
Some headset enhanced
features are not available.
R
The base unit does not support enhanced features such
as Last number redial or Call reject.
An error tone is heard when I
try to program the Bluetooth
feature.
R
The Bluetooth feature cannot be accessed immediately
after connecting the AC adaptor to the base unit. Wait a
few seconds and try again.
R
The headset has not connected to the base unit yet, even
though you performed the connecting procedure setting.
Wait a few seconds and try again.
Text message alert is not
announced.
R
The text message alert announcement depends on the
“
Ring as cell (limited)
”
setting (page 18) and the
“
Talking Caller ID
”
setting (page 40, 42).
To make the unit announce text message alerts, there are
2 methods available, depending on whether or not you
want the unit to emit the same ring as the cellular phone
when a call is being received on the cellular phone.
– If you prefer the same ring as the cellular phone, select
“
On (with Talking CID)
”
of the
“
Ring as
cell (limited)
”
setting.
– If you prefer the same ring as the unit, select
“
Off
”
of
the
“
Ring as cell (limited)
”
setting, and select
“
On
”
of the
“
Talking Caller ID
”
setting on the
handset and base unit.
74
For assistance, please visit http://www.panasonic.com/help
Useful Information
TG78xx(en)_1210_ver101.pdf 74
2012/12/10 21:19:32
Содержание KX-TG7875S
Страница 95: ...95 Notes ...
