*9 If you register 2 or more key finders.
*10 If you have 2 or more key finders.
*11 You can set the handset display backlight while on charge.
–
“
On
”
: Backlight is on (dimmed).
–
“
Off
”
: Backlight turns off after 10 seconds of charging.
*12 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any
keys, including confirmation tones and error tones.
*13 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*14 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*15 To prevent other users from joining your conversations with outside callers, turn this feature
on.
*16 This menu icon is displayed when the key finder is not registered.
Special programming
Alarm
An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R
Set the date and time beforehand
(page 14).
1
M
N
(right soft key)
#720
2
Select an alarm by pressing
1
to
3
.
a
M
OK
N
3
MbN
: Select the desired alarm option.
a
M
OK
N
“
Off
”
Turns alarm off. Go to step 9.
“
Once
”
An alarm sounds once at the set time.
“
Daily
”
An alarm sounds daily at the set time.
Go to step 5.
“
Weekly
”
Alarm sounds weekly at the set time(s).
4
Proceed with the operation according to
your selection in step 3.
n
Once:
Enter the desired date and month.
a
M
OK
N
n
Weekly:
MbN
: Select the desired day of the week
and press
M N
.
a
M
OK
N
5
Set the desired time.
a
M
OK
N
6
Enter a text memo (10 characters max.;
page 40).
a
M
OK
N
7
MbN
: Select the desired alarm tone.
a
M
OK
N
R
We recommend selecting a different
ringer tone from the one used for
outside calls.
8
MbN
: Select the desired snooze setting.
a
M
OK
N
9
M
OK
N
a
MeN
R
When the alarm is set, is displayed.
Note:
R
Press
M
N
to stop the alarm completely.
R
When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
R
Press any dial key or
M
N
to stop the
sound but keep the snooze function
activated.
26
Programming
TG7861_62NZ(en)_0121_ver003.pdf 26
2013/01/21 9:48:16