*3 When the cellular line only mode is turned on, these menus are not displayed
(page 21).
*4 After the Bluetooth device is registered, the device name is displayed.
*5 For CELL 1
*6 For CELL 2
*7 Ringer volume cannot be turned off for alarm, intercom calls, and paging.
*8 If you select one of the melody ringer tones, the ringer tone continues to play for
several seconds even if the caller has already hung up. You may either hear a
dial tone or no one on the line when you answer the call.
*9 The preset melodies in this product are used with permission of © 2009
Copyrights Vision Inc.
*10 KX-TG7641 series: page 3
*11 This feature allows the unit to automatically adjust the date and time each time
caller information including date and time is received.
To turn this feature on, select
“
Caller ID auto
”
. To turn this feature off,
select
“
Manual
”
. (Caller ID subscribers only)
To use this feature, set the date and time first (page 17).
*12 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a
tone (tone 1 to 5). If you select a melody, you cannot distinguish lines by their
ringers.
*13 This tone lets you know when you receive an outside call while you are on
another line or an intercom call. If you select
“
On
”
, the tone sounds 2 times.
*14 KX-TG7641 series base unit
You can adjust the contrast of the base unit display by performing the following
operation.
M
DISPLAY
N
a
MbN
:
“
Contrast
”
a
M N
a
MbN
: Select the desired setting.
a
M N
*15 Turn this feature off if you prefer not to hear key tones while you are dialing or
pressing any keys, including confirmation tones and error tones.
*16 If you subscribe to a Caller ID service and want to view the caller’s information
after lifting up the handset to answer a call, turn off this feature.
*17 The flash time depends on your telephone exchange or host PBX. Contact your
PBX supplier if necessary. The setting should stay at
“
700 ms
”
unless pressing
M
FLASH
N
fails to pick up the waiting call.
*18 Generally, the line mode setting should not be changed. This setting
automatically maintains receiver volume at the proper level depending on the
current telephone line condition. Set the line mode to
“
A
”
if telephone line
condition is not good.
*19 The handset can display the Internet address where you can download the
operating instructions or get further information for this product, using your
computer.
For assistance, please visit http://www.panasonic.com/help
45
Programming
Содержание KX-TG7622, KX-TG7623, KX-TG762
Страница 99: ...99 Notes ...