Panasonic KX-TG7341NZ, Руководство по эксплуатации

Страница: 16 / 52

Making/Answering Calls
16
Making calls
Using the handset
1
Lift the handset and dial the phone
number.
L
To correct a digit, press
{
C/
T
}
.
2
{C}
3
When you finish talking, press
{ih}
or place the handset on the
base unit or charger.
Using the speakerphone
1
Dial the phone number, and press
{s}
.
L
Speak alternately with the other
party.
2
When you finish talking, press
{ih}
.
Note:
L
For best performance, use the
speakerphone in a quiet environment.
L
To switch back to the receiver, press
{C}
.
Adjusting the receiver or speaker
volume
Press
{^}
or
{V}
repeatedly while
talking.
Making a call using the redial list
The last 10 phone numbers dialled are
stored in the redial list (each 24 digits
max.).
1
j
(right soft key)
2
{V}
/
{^}
: Select the desired phone
number.
3
{C}
Erasing a number in the redial list
1
j
(right soft key)
2
{V}
/
{^}
: Select the desired phone
number.
i K i M
3
{V}
/
{^}
: “
Yes
”
i M i
{ih}
Using the base unit
1
{s}
2
Dial the phone number.
3
When the other party answers,
speak into the microphone.
L
Speak alternately with the other
party.
4
When you finish talking, press
{s}
.
Note:
L
Use the speakerphone in a quiet
environment.
L
While on a call, you can switch from
the base unit to the handset:
– Press
{C}
on the handset, then
press
{s}
on the base unit.
– If the handset is on the base unit,
simply lift it.
Adjusting the speaker volume
Press
{^}
or
{V}
repeatedly while
talking.
Redialling the last number dialled
{s}
i
{R}
Pause (for PBX/long distance
service users)
A pause is sometimes required when
making calls using a PBX or long
distance service. When storing a calling
card access number and/or PIN in the
phonebook, a pause is also needed
(page 21).
Example: If you need to dial the line
access number “0” when making outside
calls with a PBX:
TG7341NZ(e).book Page 16 Wednesday, September 3, 2008 11:37 AM