Programming
26
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Changing the base unit PIN
(Personal Identification
Number)
Important:
L
If you change the PIN, please make
note of your new PIN. The unit will not
reveal the PIN to you. If you forget
your PIN, see page 43.
1
K
(middle soft key)
2
{V}
/
{^}
:
“
Base Unit Setup
”
i
M
3
{V}
/
{^}
:
“
Base Unit PIN
”
i
M
4
Enter the current 4-digit base unit
PIN (default:
“
0000
”
).
5
Enter the new 4-digit base unit PIN.
i
M
i
{ih}
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to
the base unit.
Important:
L
The additional handset model
recommended for use with this unit is
noted on page 6. If another handset
model is used, certain operations
(handset settings, base unit settings,
etc.) may not be available.
Registering a handset to the
base unit
The supplied handset and base unit are
pre-registered. If for some reason the
handset is not registered to the base unit
(for example,
w
flashes even when the
handset is near the base unit), register
the handset.
1
Handset:
K
(middle soft key)
2
{V}
/
{^}
:
“
Handset Setup
”
i
M
3
{V}
/
{^}
:
“
Register H.set
”
i
M
4
Base unit:
Proceed with the operation for your
model.
■
KX-TG7301/KX-TG7302/
KX-TG7303/KX-TG7304
Press and hold
{x}
for about 5
seconds. (No registration tone)
■
KX-TG7321/KX-TG7322/
KX-TG7323/KX-TG7324
Press and hold
{x}
for about 5
seconds, until the registration
tone sounds.
L
If all registered handsets start
ringing, press the same button to
stop. Then repeat this step.
L
The next step should be
completed within 90 seconds.
5
Handset:
Wait until
“
Enter Base PIN
”
is
displayed.
i
Enter the base unit
PIN (default:
“
0000
”
).
i
M
L
If you forget your PIN, see page
43.
L
When the handset has been
registered successfully,
w
stops
flashing.
Note:
L
When you purchase an additional
handset, refer to the additional
handset’s installation manual for
registration.
TG7301-7321E(e).book Page 26 Thursday, February 14, 2008 9:26 AM