Preparation
9
line cord or telephone plug appropriate to your
country, noted on side 4.
L
Never install telephone wiring during a
lightning storm.
L
The AC adaptor must remain connected at all
times. (It is normal for the adaptor to feel warm
during use.)
L
The AC adaptor should be connected to a
vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to an AC outlet
that is installed on a ceiling or under a table
facing the floor, as the weight of the adaptor
may cause the adaptor to become
disconnected.
Location
L
For maximum distance and noise-free
operation, place your base unit:
– away from electrical appliances such as
TVs, radios, personal computers or other
phones.
– in a convenient, high and central location.
Battery
installation/replacement
Vigtigt:
L
Use only the included rechargeable batteries
noted on side 4, 6.
L
When replacing batteries, we recommend
using the Panasonic rechargeable batteries
noted on side 5, 6.
1
Press the notch on the handset cover firmly
and slide it in the direction of the arrow.
L
When replacing batteries, remove the old
batteries positive (
S
) terminal first.
2
Insert the batteries negative (
T
) terminal
first. Close the handset cover.
Battery charge
Place the handset on the base unit or charger
for about 7 hours before initial use.
When charging, the battery icon is shown as
follows.
When the batteries are fully charged,
5
remains on the display.
L
The charge indicator lights up when the
handset is placed on the base unit or charger.
*1 KX-TG7102 and KX-TG7103 only
Bemærk:
L
It is normal for the handset to feel warm during
charging.
L
If you want to use the unit immediately, charge
the batteries for at least 15 minutes.
L
Clean the charge contacts of the handset,
base unit, and charger with a soft, dry cloth
Base unit
Charger
*1
Charge
contact
TG7100-7102-7103NE(e-da).book Page 9 Wednesday, April 19, 2006 1:09 PM