Base Unit Settings
20
Call options
Setting call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up
to 6 phone numbers to be restricted, and
select which handsets will be restricted.
Storing area codes here will prevent the
restricted handsets from dialling any phone
number in that area code.
1
{j
/OK
}
i
“
Base Unit Setup
”
i
{
>
}
2
“
Call Options
”
i
{
>
}
3
“
Call Restrict
”
i
{
>
}
4
Enter the base unit PIN (default:
“
0000
”
).
5
Set which handsets will be restricted by
pressing the desired handset number.
L
All the registered handset numbers
will be displayed.
L
Flashing numbers indicate call
restriction is turned on for the
corresponding handset.
L
To turn call restriction off for a handset,
press the number again. The number
will stop flashing.
6
{j
/OK
}
7
Select a memory location.
i
{
>
}
8
Enter the phone number or area code to
be restricted (8 digits max.).
i
{j
/OK
}
i
{ih}
L
To erase a restricted number, press
{
C/
T
}
.
Changing the unit’s region
setting/Resetting the base unit
1
{j
/OK
}
i
“
Base Unit Setup
”
i
{
>
}
2
“
Other Options
”
i
{
>
}
3
“
Country
”
i
{
>
}
4
Select the desired country.
i
{
>
}
“
EG
”
=countries except Czech and
Slovakia
“
CZ
”
=Czech
“
SK
”
=Slovakia
5
“
Yes
”
i
{j
/OK
}
i
{ih}
Note:
L
The following items will be deleted or reset
to their default settings:
– Settings listed on page 19, 25, 30
– All SMS messages
– Caller list
L
The following items will be retained:
– Date and time
– Repeater mode
– Recordings, including your greeting
message and caller messages (KX-
TG7120 only)
L
If you select the desired country in step 4,
the following default settings will be
changed for the selected country’s default
settings:
– Message centre 1 and 2 (page 25)
– Recall time (page 19)
– Language (page 16)
– SMS on/off (page 25)
– Language used for answering system
announcements (KX-TG7120 only)
L
After changing the unit’s region
setting/resetting the base unit,
w
will flash
on the handset momentarily. This is
normal. The handset can be used once
w
stops flashing.
TG7100-7120FX(e-e).book Page 20 Thursday, August 10, 2006 10:32 AM