Panasonic KX-TG7100BXS Скачать руководство пользователя страница 14

Страница: 14 / 74

KX-TG7100BXS/KX-TG7100BXT/KX-TGA710CXS/KX-TGA710CXT

5 Location of Controls and

Components

5.1.

Controls

5.1.1.

Base Unit

5.1.2.

Handset

6 Installation Instructions

6.1.

Connections

When connecting the AC adaptor to the base unit, a short
beep will be heard. If it is not heard, check the connections.

Note:

• Never install telephone wiring during a lightning storm.
• The AC adaptor must remain connected at all times. (It is

normal for the adaptor to feel warm during use.)

• The AC adaptor should be connected to a vertically oriented

or floor-mounted AC outlet. Do not connect the AC adaptor
to a ceiling-mounted AC outlet, as the weight of the adaptor
may cause it to become disconnected.

• The unit will not work during a power failure. We recommend

connecting a standard telephone to the same telephone line
or to the same telephone jack using a T-adaptor.

Location

• For maximum distance and noise-free operation, place your

base unit:

- away from electrical appliances such as TVs, radios,

personal computers or other phones.

- in a convenient, high and central location.

If you subscribe to a DSL service

• Please attach a noise filter (contact your DSL service pro-

vider) to the telephone line between the base unit and the
telephone line jack in the event of the following:

- Noise is heard during conversations.
- Caller ID features do not function properly.

Содержание KX-TG7100BXS











































































Результаты поиска

Содержание KX-TG7100BXS

Отзывы:

Похожие инструкции для KX-TG7100BXS

Бренды по названию

Популярные бренды

Panasonic KX-TG7100BXS, Руководство по обслуживанию

Результаты поиска

Содержание KX-TG7100BXS

Отзывы:

Похожие инструкции для KX-TG7100BXS

Бренды по названию

Популярные бренды