Panasonic KX-TG6842C, Руководство по эксплуатации

Страница: 32 / 60

mode. The default setting is “
No
” . If you select
“
Yes
” without entering any handset name,
“ Handset 1 ” to “ Handset 6 ” is displayed.
Handset
1
M MENU N#104
2
Enter the desired name (max. 10
characters; see the character table,
page 21).
R If not required, go to step 3.
3
M SAVE N
4
MbN : Select the desired setting. a
M SELECT N 2 times
5
M OFF N
Call block (Call Display
subscribers only)
This feature allows the unit to reject calls when:
– the unit receives a call from a phone
number stored in the call block list as
unwanted (“Storing unwanted callers”,
page 32).
– the unit receives a call without phone
number (“Blocking incoming calls without
phone number”, page 33).
When a call is received, the unit rings for a
short time
*1
while the caller is being identified.
If the phone number matches an entry in the
call block list, the unit emits no sound to the
caller, and disconnects the call.
*1 This is called first ring. If you do not want
the first ring to sound, turn this setting to
“ Off ” (page 33).
Important:
R When the unit receives a call from a
number that is stored in the call block list or
a call without a recognized phone number,
the call is logged in the caller list
(page 37) with
after the call is
disconnected.
R You can program this setting using either
the base unit or one of the handsets.
Storing unwanted callers
You can store up to 250 phone numbers in the
call block list.
Important:
R We recommend storing 10 digits (including
an area code). If only 7 digits are stored, all
numbers that have the same last 7 digits
will be blocked.
n From the caller list:
Handset
1
MCN CID
2
MbN : Select the entry to be blocked.
R To edit the number: M MENU N a MbN :
“
Edit
” a M SELECT N
Press M EDIT N repeatedly until the
phone number is shown in the 10-digit
format. And then, press
M SAVE N . Go to
step 5.
3
M MENU N
4
MbN : “
Save CID
” a M SELECT N
5
MbN : “
Call block
” a M SELECT N
6
MbN : “
Yes
” a M SELECT N
7
Edit the phone number if necessary (24
digits max.).
8
M SAVE N a M OFF N
Base unit
1
M CID N
2
MbN : Select the entry to be blocked.
R To edit the number, press M EDIT N
repeatedly until the phone number is
shown in the 10-digit format.
3
M SAVE N
4
MbN : “
Call block
” a M SELECT N
5
MbN : “
Yes
” a M SELECT N
6
Edit the phone number if necessary (24
digits max.).
7
M SAVE N a M EXIT N
n By entering phone numbers:
Handset
1
M MENU N#217
2
M MENU N a MbN : “
Add
” a M SELECT N
3
Enter the phone number (24 digits max.).
R To erase a digit, press M CLEAR N .
32
Programming
TG684xC(en)_1220_ver013.pdf 32 2012/12/20 14:59:07