Panasonic KX-TG6842C Скачать руководство пользователя страница 51

Страница: 51 / 60

Error messages

Display message

Cause/solution

Access # to VM service is
not stored

You have not stored the Voice Mail access number.
Store the number (page 46).

Base no power

No link. Re-connect base
AC adaptor.

No link.

The handset has lost communication with the base
unit. Move closer to the base unit and try again.

Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.

The handset’s registration may have been cancelled.
Re-register the handset (page 33).

When

“

No link.

”

is displayed during a power

failure, place a handset on the base unit to supply
power to the base unit.

Busy

The called unit is in use.

Other units are in use and the system is busy. Try
again later.

The handset you are using is too far from the base
unit. Move closer and try again.

Check tel line

The supplied telephone line cord has not been
connected yet or not connected properly. Check the
connections (page 9).

Error!!

Recording was too short. Try again.

Invalid

There is no handset registered to the base unit
matching the handset number you entered.

The handset is not registered to the base unit.
Register the handset (page 33).

Requires subscription to
Caller ID.

You must subscribe to a Call Display service. Once
you receive caller information after subscribing to a
Call Display service, this message will not be
displayed.

Use rechargeable battery.

A wrong type of battery such as Alkaline or
Manganese was inserted. Use only the rechargeable
Ni-MH batteries noted on page 4, 6.

Useful Information

TG684xC(en)_1220_ver013.pdf 51

2012/12/20 14:59:08

Содержание KX-TG6842C





























































Результаты поиска

Содержание KX-TG6842C

Отзывы:

Похожие инструкции для KX-TG6842C

Бренды по названию

Популярные бренды

Panasonic KX-TG6842C, Руководство по эксплуатации

Результаты поиска

Содержание KX-TG6842C

Отзывы:

Похожие инструкции для KX-TG6842C

Бренды по названию

Популярные бренды