Main menu:
“
Key Finder
”
*8
Sub-menu 1
Sub-menu 2
Settings
Code
Search
–
–
#655
–
Battery Check
–
–
Main menu: “
Ringer Setup
”
*16,
*17
Sub-menu 1
Sub-menu 2
Settings
Code
Ringer Volume
Handset
0-6:
Off
-6 <6>
#160
18
Base Unit
*1,
*2
0-6:
Off
-6 <3>
#
G
160
–
Ringtone
*5, *6
(Handset)
–
<
Ringtone 1
>
#161
–
Night Mode
On/Off
1:
On
0:
<
Off
>
#238
30
Start/End
<23:00/06:00>
#237
30
Ring Delay
1:
30 sec.
2:
<
60 sec.
>
3:
90 sec.
4:
120 sec.
0:
No Ringing
#239
30
First Ring
*2,
*7
–
1:
<
On
>
0:
Off
#173
–
Main menu:
“
Caller Barred
”
*2, *18
Operation
Code
Storing/Viewing bar call numbers.
#217
30
*1 KX-TG6821 series: page 3
*2 If you program these settings using one of the handsets, you do not need to program the
same item using another handset.
*3 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*4 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select
“
Caller ID
”
. To turn this feature off, select
“
Manual
”
.
(Caller ID subscribers only)
To use this feature, set the date and time first (page 15).
*5 The ringer tone may continue to play for several seconds even if the caller has already hung
up. You may either hear a dial tone or no one on the line when you answer the call.
*6 The preset melodies in this product (
“
Ringtone 3
”
-
“
Ringtone 40
”
) are used with
permission of © 2012 Copyrights Vision Inc.
*7 If you do not want the unit to ring before the caller information is received, set to
“
Off
”
.
(Caller ID subscribers only)
You can only remove the first ring if the unit rings 2 times or more by default, which depends
on your service provider/telephone company.
*8 This setting is available when you have the key finder (KX-TGA20AZ). Read the installation
guide for more information on the key finder.
28
Programming
PNQX5803YA_0719_ver122.pdf 28
2013/07/19 10:53:44