Character entry
The dial keys are used to enter characters and numbers. Each dial key has multiple characters
assigned to it. The characters that can be entered depend on the character entry mode
(page 42).
– Press
MFN
or
MEN
to move the cursor left or right.
– Press dial keys to enter characters and numbers.
– Press
to erase the character or number highlighted by the cursor. Press and hold
to
erase all characters or numbers.
– Press
*
(A
a
a) to switch between uppercase and lowercase.
– To enter another character located on the same dial key, press
MEN
to move the cursor to the
next space, then press the appropriate dial key.
– If you do not press any dial key within 5 seconds after entering a character, the character is
fixed and the cursor moves to the next space.
Character entry modes
The available character entry modes are Alphabet (ABC), Numeric (0-9), Greek (
),
Extended 1 (
), Extended 2 (
), and Cyrillic (
). When in these entry modes except
Numeric, you can select which character is entered by pressing a dial key repeatedly.
When the unit displays the character entry screen:
a
MbN
: Select a character entry mode.
a
Note:
R
in the following tables represents a single space.
Alphabet character table (ABC)
z
y
1 2 3 4 5 6 7 8 9
Numeric entry table (0-9)
z
y
1 2 3 4 5 6 7 8 9
Greek character table (
)
z
y
1 2 3 4 5 6 7 8 9
42
Useful Information
TG6711_21NZ(en)_0216_ver011.pdf 42
2012/02/17 15:48:58
