Panasonic KX-TG6700 Скачать руководство пользователя

Страница: 56 / 72

Useful Information

For assistance, please visit http://www.panasonic.com/phonehelp

Error messages

If the unit detects a problem, one of the following messages is shown on the display.

Display message

Cause/solution

Busy

The called handset or base unit is in use.

Other users are using the line(s). Wait until the line
status icon goes out.

Privacy mode is on for the call you tried to join (page
26).

The handset you tried to copy phonebook items to is in
use.

The handset you are calling is too far from the base unit.

Denied

The room monitor feature is turned off on the
destination handset or base unit and the room cannot
be monitored (page 53).

Error!!

The handset’s registration has failed. Move the handset
and base unit away from all electrical appliances and try
again.

Another handset user tried to send phonebook items to
you but there was an error. Have the other user re-send
the items to you (page 30).

Error!!
All handsets
registered.
Maximum is 8.

8 handsets have already been registered to the base
unit. A previously deregistered handset number may
still be retained in the base unit. To register an
additional handset, erase the unnecessary handset
number using the base unit:
Press and hold

{

INTERCOM

}

until the IN USE indicator

flashes.

Press and hold the handset’s extension

number (

{

}

–

{

}

) that you want to cancel/delete from

the base unit until a beep sounds.

---Incomplete---

The destination handset’s phonebook memory is full.
Erase unnecessary items from the destination
handset’s phonebook (page 29).

The destination handset is out of area.

The destination handset user may have pressed

{C}

{s}

TG6700.book Page 56 Monday, April 24, 2006 10:28 AM

Содержание KX-TG6700









































































Результаты поиска

Содержание KX-TG6700

Отзывы:

Похожие инструкции для KX-TG6700

Бренды по названию

Популярные бренды

Panasonic KX-TG6700, Руководство по эксплуатации

Результаты поиска

Содержание KX-TG6700

Отзывы:

Похожие инструкции для KX-TG6700

Бренды по названию

Популярные бренды