Panasonic KX-TG6591, Руководство по эксплуатации

Страница: 15 / 64

Making calls
Using the handset
1
Lift the handset and dial the phone
number.
R To correct a digit, press M CLEAR N .
2
Press M N or M CALL N .
3
When you finish talking, press
M OFF N or place the handset on the
base unit or charger.
Using the speakerphone
1
Dial the phone number and press
M N .
R Speak alternately with the other
party.
2
When you finish talking, press
M OFF N .
Note:
R For best performance, use the
speakerphone in a quiet environment.
R To switch back to the receiver, press
M N / M N .
Adjusting the receiver or speaker
volume
Press MjN or MkN repeatedly while
talking.
Note:
R There are 5 volume levels (1 to 5) for
the receiver. When you change the
receiver volume to level 5 (maximum
level), the volume returns to level 4
(default) after you hang up.
Making a call using the redial list
The last 5 phone numbers dialed are
stored in the redial list (each 48 digits
max.).
1
M REDIAL N or MEN REDIAL
R If there is a new message in the
voice mail or answering system,
M REDIAL N is not displayed.
2
MbN : Select the desired phone
number.
3
M N
Erasing a number in the redial list
1
M REDIAL N or MEN REDIAL
2
MbN : Select the desired phone
number. a M ERASE N
3
MbN : “
Yes
” a M SELECT N
4
M OFF N
Pause (for PBX/long distance service
users)
A pause is sometimes required when
making calls using a PBX or long
distance service. When storing a calling
card access number and/or PIN in the
phonebook, a pause is also needed
(page 21).
Example: If you need to dial the line
access number “9” when making outside
calls with a PBX:
1
9 a M PAUSE N
2
Dial the phone number. a M N
Note:
R A 3.5 second pause is inserted each
time
M PAUSE N is pressed. Repeat as
needed to create longer pauses.
Using the base unit
You can make calls with the base unit
after storing phone number in speed dial
key (page 22).
1
Press the speed dial key ( M A N to
M C N ).
For assistance, please visit http://www.panasonic.com/help
15
Making/Answering Calls