![background image](http://html1.mh-extra.com/html/panasonic/kx-tg6582t/kx-tg6582t_operating-instructions-manual_4253787016.webp)
Link to Cell
16
For assistance, please visit http://www.panasonic.com/help
phone is connected to the base
unit. You are ready to make
cellular calls.
4
To select which unit receives calls
for the cellular line, press
{
OK
}
then
continue from step 3, “Selecting
which unit receives cellular calls”,
page 16.
L
If not required, go to step 5.
5
{
OFF
}
Note:
L
Make sure that your cellular phone is
set to connect to this product
automatically. Refer to your cellular
phone’s operating instructions.
L
Make sure you cancel your cellular
phone’s current registration if you
want to register it to the other line
(page 19).
Link to cell settings
Selecting which unit receives
cellular calls
You can select which unit rings and
receives calls for a cellular line. When
“
All
”
is selected, all handsets and the
base unit ring.
1
{
MENU
}
2
For CELL 1:
{#}{
6
}{
2
}{
7
}{
1
}
For CELL 2:
{#}{
6
}{
2
}{
7
}{
2
}
3
{V}
/
{^}
: Select the desired handset
or
“
All
”
.
4
{
SAVE
}
i
{
OFF
}
Note:
L
When you select a specific handset to
receive calls for a cellular line:
– other handsets cannot answer the
calls.
– the base unit can answer the calls
even though it does not ring.
However, you can make the base
unit ring by adjusting the base unit
ringer volume (page 36).
L
When you change the setting to
“
All
”
, the base unit ringer volume
also returns to the lowest level even if
the ringer volume has been changed.
Ring as cell mode
Once this feature is turned on, the
handset and base unit ring using the
same ringer tone as your cellular phone.
The following settings are available:
–
“
Off
”
: Turn this feature off to use the
ringer tones of the handset and base
unit. Caller information is announced
depending on the Talking Caller ID
setting (page 35).
–
“
On (with Talking CID)
”
(default): The handset and base unit
use your cellular phone’s ringer tone.
Caller information is announced even
if the Talking Caller ID is turned off.
–
“
On (without Talking CID)
”
:
The handset and base unit use your
cellular phone’s ringer tone. Caller
information is not announced even if
the Talking Caller ID is turned on.
Important:
L
To use this feature, your cellular
phone must support Bluetooth in-
band ringtone. Refer to your cellular
phone’s operating instructions.
1
{
MENU
}
2
For CELL 1:
{#}{
6
}{
1
}{
4
}{
1
}
For CELL 2:
{#}{
6
}{
1
}{
4
}{
2
}
3
{V}
/
{^}
: Select the desired setting.
4
{
SAVE
}
i
{
OFF
}
Note:
L
The units use the preset ringer tones
(page 36) instead of your cellular
TG658x(e).book Page 16 Friday, February 26, 2010 7:50 AM