Panasonic KX-TG6511BXB Скачать руководство пользователя страница 22

Страница: 22 / 82

KX-TG6511BXB/KX-TG6512BXB/KX-TG6513BXB/KX-TG6519BXB/KX-TGA651BXB

8.3.

How to Clear User Setting

Units are reset to the Factory settings by this operation (Erase, stored Phone numbers, Caller list and etc.)

Note:

• Some menus are not reset. Refer to

Operating Instructions

(P.15).

• The reset menus differ depending on the following operations.
•

This operation should not be performed for a usual repair.

8.3.1.

Resetting both base unit and handset

Both the base unit and the registered handset which you did the following steps

are reset. Other registered handsets

will not be reset.

Note:

(*1) Refer to

Registering a Handset to a Base Unit

in the Operating Instructions.

8.3.2.

Resetting only handset

The only handset is reset by doing the following steps

Note:

(*2)

• The handset registration to the base unit is cancelled.
• If the handset needs to be registered to the base unit, refer to

Registering a Handset to a Base Unit

in the Operating

Instructions.

• If users do not bring the base unit with them, the registration procedure has to be done by users themselves.

Содержание KX-TG6511BXB



















































































Результаты поиска

Содержание KX-TG6511BXB

Отзывы:

Бренды по названию

Популярные бренды

Panasonic KX-TG6511BXB, Руководство по обслуживанию

Результаты поиска

Содержание KX-TG6511BXB

Отзывы:

Бренды по названию

Популярные бренды