Panasonic KX-TG6431 Скачать руководство пользователя страница 4

– 4 –

Frequently asked questions

Question

Cause/solution

Why is 

_

 displayed?

L

The handset is too far from the base unit. Move 
closer.

L

The base unit’s AC adaptor is not properly connected. 
Reconnect AC adaptor to the base unit.

L

You are using the handset or base unit in an area with 
high electrical interference. Re-position the base unit 
and use the handset away from sources of 
interference.

L

The handset is not registered to the base unit. 
Register it.

How can I increase the 
handset volume level?

L

Press the navigator key 

{^}

 repeatedly while talking.

Why is the conversation 
noisy or cutting off?

L

Try to relocate the base unit so that the distance to 
the handset is minimized.

L

If the same problem occurs even if the handset is next 
to the base unit, call Panasonic customer support at 
1-800-211-PANA (1-800-211-7262).

Can I add another 
accessory handset to my 
base unit?

L

Yes, you can add up to 6 handsets (including the 
handset(s) sold with your base unit) to a single base 
unit.

L

To purchase additional accessory handset(s)
(KX-TGA641/KX-TGA740), please visit 
http://www.panasonic.com 
or call 1-800-332-5368. TTY users (hearing or 
speech impaired users) can call 1-866-605-1277.

Can I keep the batteries 
charging all the time?

L

You can leave the handset on the base unit or charger 
anytime. This will not harm the batteries.

How can I answer a call 
waiting call (2nd call)?

L

Press 

{

CALL WAIT

}

 when you hear the call waiting 

tone.

For further information, visit 

http://www.panasonic.com/help

 or refer to operating 

instructions.

TG643x_QG(e).fm  Page 4  Thursday, November 27, 2008  4:57 PM

Содержание KX-TG6431









Отзывы: