Programming
1
3
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to
the base unit.
Important:
L
The additional handset model
recommended for use with this unit is
noted on page 4. If another handset
model is used, certain operations
(handset settings, base unit settings,
etc.) may not be available.
Registering a handset to a
base unit
The supplied handset and base unit are
pre-registered. If for some reason the
handset is not registered to the base unit
(for example,
w
flashes even when the
handset is near the base unit), re-
register the handset.
1
Handset:
8
(middle soft key)
TG6411-6421E(e).book Page 23 Monday, November 17, 2008 5:17 PM
2
{V}
/
{^}
:
“
Handset Setup
”
i
M
3
{V}
/
{^}
:
“
Register H.set
”
i
M
4
Base unit:
Proceed with the operation for your
model.
■
KX-TG6411/KX-TG6412
Press and hold
{x}
for about 5
seconds. (No registration tone)
■
KX-TG6421
Press and hold
{x}
for about 5
seconds, until the registration
tone sounds.
L
If all registered handsets start
ringing, press the same button to
stop. Then repeat this step.
L
The next step must be completed
within 90 seconds.
5
Handset:
Wait until
“
Base PIN
”
is displayed.
i
Enter the base unit PIN (default:
“
0000
”
).
i
M
L
L
When the handset has been
registered successfully,
w
stops
flashing.
Note:
L
When you purchase an additional
handset, refer to the additional
handset’s installation manual for
registration.
Deregistering a handset
A handset can cancel its own
registration (or the registration of
another handset) that is stored to the
base unit. This allows the handset to end
its wireless connection with the system.
1
8
(middle soft key)
2
{V}
/
{^}
:
“
Base Unit Setup
”
i
M
3
{
3
}{
3
}{
5
}
4
{V}
/
{^}
:
“
Cancel Register
”
i
M
L
The numbers of all handsets
registered to the base unit are
displayed.
5
Select the handset(s) you want to
cancel by pressing the desired
handset number.
i
M
L
The selected handset number(s)
flashes.
L
To cancel a selected handset
number, press the number again.
The number stops flashing.
If you forget your PIN, contact
your nearest Panasonic service
centre.
