![background image](http://html2.mh-extra.com/html/panasonic/kx-tg6411bx/kx-tg6411bx_service-manual_4184604003.webp)
3
KX-TG6411BX/KX-TG6412BX/KX-TG6413BX/KX-TGA641BX
1.2.
Circuit Operation (Base Unit)
1.2.1.
Outline
Base Unit consists of the following ICs as shown in
Block Diagram (Base Unit)
(P.2).
• DECT BBIC (
B
ase
B
and IC): IC7
- Handling all the audio, signal and data processing needed in a DECT base unit
- Controlling the DECT specific physical layer and radio section (
B
urst
M
odule
C
ontroller section)
- ADPCM code filter for speech encoding and speech decoding (DSP section)
- Echo-cancellation and Echo-suppression (DSP section)
- Any tones (tone, sidetone, ringing tone, etc.) generation (DSP section)
- DTMF receiver (DSP section)
- Clock Generation for RF Module
- ADC, DAC, timer, and power control circuitry
- PLL Oscillator
- Detector
- Compress/Expander
- First Mixer
- All interfaces (ex: RF Power Amp, EEPROM, LED, Analog Front End, etc.)
• RF Power Amp.: IC801
- Amplifier for transmission and reception
• EEPROM: IC401
- Temporary operating parameters (for RF, etc.)
• Additionally,
- Power Supply Circuit (+3.0 V, +2.4 V, +1.8 V output)
- Crystal Circuit (10.368 MHz)
- Charge Circuit
- Telephone Line Interface Circuit