Preparation
9
Setting up the base
unit
Connecting the AC adaptor
and telephone line cord
Connect the telephone line cord until it
clicks into the base unit and telephone
line socket (
A
). Connect the AC
adaptor cord (
B
) by pressing the plug
firmly (
C
).
L
Use only the included Panasonic AC
adaptor PQLV203AL.
Note:
L
The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
L
The AC adaptor should be connected
to a vertically oriented or floor-
mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the
adaptor may cause it to become
disconnected.
L
The unit will not work during a power
failure. We recommend connecting a
corded telephone to the same
telephone line or to the same
telephone socket using a BT double
adaptor.
L
The unit is not designed to be used
with rotary (pulse dialling) services.
L
The unit’s answering system will not
answer incoming calls on your
FaxAbility number.
If you subscribe to an ADSL service
Please attach a noise filter (contact your
ADSL provider) to the telephone line
between the base unit and the
telephone line socket in the event of the
following:
– Noise is heard during conversations.
– Caller ID features do not function
properly.
Setting up the handset
Connecting the AC adaptor
L
Use only the included Panasonic AC
adaptor PQLV208AL.
(230–240 V AC,
50/60 Hz)
B
Hooks
C
To single-line
telephone socket
A
Available model:
KX-TG6052
To single-line
telephone socket
Noise filter
(230–240 V AC,
50/60 Hz)
Fasten the AC adaptor cord to
prevent it from being disconnected.
Bottom of the charger
Hooks
Hooks
