Useful Info
rmation
Answering
System
T
e
lephone System
17
Programmable Settings
Preparatio
n
Date and Time
We recommend you set the date and time so that the unit will announce the day
and time each message was recorded when you play back messages.
•
When entering the time, you cannot enter numbers greater than 12.
Do not use
military time.
(To set 13:00 hours, enter “0100”, and select “PM” in step 4.
)
•
When the display language is set to French, you can use military time (see
page 17 of the French Operating Instructions).
To confirm the date and time,
repeat steps 1 and 2.
•
The current date and time are displayed. When finished, press
[OFF]
.
1
Press
[MENU]
.
2
Scroll to “
Date and time
” by pressing
[
d
]
or
[
B
]
, then press the soft key (
).
3
(1) Enter 2 digits each for the month, day and
year. (e.g. To set June 15, 2005, enter
“06 15 05”.)
(2) Enter 4 digits for the time (hour and
minute). (e.g. To set 9:30, enter “0930”.)
•
If you enter a wrong number, press the soft key
(
) or (
), or press
[
B
]
or
[
d
]
to move
the cursor to the incorrect number. Enter the
correct number.
4
Select “
AM
” or “
PM
” by pressing
[
*
]
.
5
Press the soft key (
).
•
The date and time are set and “
E
” disappears from the base unit display.
•
If the handset beeps 3 times, the date and time were not set correctly. Start
again from step 3.
6
Press
[OFF]
.
The date and time may be incorrect after a power failure. When “
E
” flashes on
the base unit display, set the date and time again.
For Call Display service users (p. 33)
•
When a call is received, the unit automatically adjusts the date and time if the
time is incorrect.
•
The unit will automatically adjust the date and time for daylight saving time.
•
If the date and time have not been previously set, the unit will not automatically
adjust the date and time.
Handset
SELECT
Date and time
f
g
Date:
|
12.31.2004
Time:12:00 AM
0-9=Date&Time
@
=AM/PM
Date:
|
06.15.2005
Time:09:30 AM
0-9=Date&Time
@
=AM/PM
SAVE
TG5471C(E).fm Page 17 Sunday, February 13, 2005 6:10 PM
