Programming
24
For assistance, please visit http://www.panasonic.com/help
2
Enter the desired name (max. 10
characters; see the character table, page
17).
L
If not required, go to step 3.
3
{
SAVE
}
4
{
r
}
: Select the desired setting.
s
{
SELECT
}
5
{
SELECT
}
s
{
OFF
}
Call block (Caller ID subscribers
only)
This feature allows the unit to reject calls
when:
– the unit receives a call from a phone
number stored in the call block list as
unwanted (“Storing unwanted callers”, page
24).
– the unit receives a call without phone
number (“Block calls without phone
number”, page 24).
When a call is received, the unit rings for a
short time while the caller is being identified. If
the phone number matches an entry in the call
block list, the unit sends out a busy tone to the
caller, and then disconnects the call.
Important:
L
When the unit receives a call from a number
that is stored in the call block list or a call
without a recognized phone number, the
call is logged in the caller list (page 27) with
$
after the call is disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in the
call block list by using the caller list or by
entering the numbers directly.
Important:
L
We recommend storing 10 digits (including
an area code). If only 7 digits are stored, all
numbers that have the same last 7 digits will
be blocked.
■
From the caller list:
1
{
<
}
CID
2
{
r
}
: Select the entry to be blocked.
L
To edit the number, press
{
EDIT
}
repeatedly until the phone number
is shown in the 10-digit format.
3
{
SAVE
}
4
{
r
}
:
“
Call block
”
s
{
SELECT
}
5
{
r
}
:
“
Yes
”
s
{
SELECT
}
6
Edit the phone number if necessary
(24 digits max.).
7
{
SAVE
}
s
{
OFF
}
■
By entering phone numbers:
1
{
MENU
}
(
217
s
{
ADD
}
2
Enter the phone number (24 digits
max.).
L
To erase a digit, press
{
CLEAR
}
.
3
{
SAVE
}
s
{
OFF
}
Block
ing
calls without phone number
You can reject a call without phone number
including
“
Out of area
”
,
“
Private
caller
”
, or
“
Long distance
”
.
1
{
MENU
}
(
24
)
2
{
r
}
: Select the desired setting.
s
{
SAVE
}
s
{
OFF
}
Viewing/editing/erasing call block
numbers
1
{
MENU
}
(
217
2
{
r
}
: Select the desired entry.
L
To exit, press
{
OFF
}
.
3
To edit a number:
{
EDIT
}
s
Edit the phone number.
s
{
SAVE
}
s
{
OFF
}
To erase a number:
{
ERASE
}
s
{
r
}
:
“
Yes
”
s
{
SELECT
}
s
{
OFF
}
Note:
L
When editing, press the desired dial key to
add,
{
CLEAR
}
to erase.
L
When viewing,
“
Block w/o num
”
is
displayed if the block calls without phone
number feature is turned on. To turn the
feature off:
{
ERASE
}
s
{V}
s
{
SAVE
}
s
{
OFF
}
TG413x(e).book Page 24 Friday, September 24, 2010 8:45 AM
