Problem
Cause/solution
I fully charged the batteries, but
–
still flashes,
–
is displayed, or
– the operating time seems to
be shorter.
R
Clean the battery ends (
,
) and the charge contacts
with a dry cloth and charge again.
R
It is time to replace the batteries (page 9).
Making/answering calls, intercom
Problem
Cause/solution
is displayed.
R
The handset is too far from the base unit. Move closer.
R
The base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
R
The handset is not registered to the base unit. Register it
(page 32).
Noise is heard, sound cuts in
and out.
R
You are using the handset or base unit in an area with
high electrical interference. Re-position the base unit and
use the handset away from sources of interference.
R
Move closer to the base unit.
R
If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base unit and
the telephone line jack. Contact your DSL/ADSL provider
for details.
The handset or base unit does
not ring.
R
The ringer volume is turned off. Adjust the ringer volume
(page 15, 25).
R
Silent mode is turned on. Turn it off (page 29).
R
The ringer volume is turned off by pressing and holding
0
. Press and hold
0
again to turn it on (page 15).
I cannot make a call.
R
The dialing mode may be set incorrectly. Change the
setting (page 13).
I cannot make long distance
calls.
R
Make sure that you have long distance service.
I cannot use voice paging.
R
You cannot use voice paging if other units are in use.
R
Voice paging is not available when a range extender
(KX-TGA405) is registered to the base unit.
For assistance, please visit http://shop.panasonic.com/support
47
Useful Information
TGL43x(en)_0603_ver101.pdf 47
2016/06/03 17:30:19