20
KX-TG3661JXM/KX-TG3662JXM/KX-TG3668JXM/KX-TG3669JXM/KX-TGA365JXM
8 Test Mode
8.1.
Test Mode Function (Base unit)
8.2.
Test Mode Function (Cordless Handset)
1 Disconnect the AC Adaptor cord.
2 While pressing
{
1
}
{
3
}
{
MUTE
}
simultaneously, connect the AC Adaptor.
3 [00] is displayed on the LCD when becoming a static test mode. The figure blinks.
4 When the examination is ended,
{
MUTE
}
KEY is pressed.
5 When the test mode is ended, disconnect the AC Adaptor cord.
Item
Key operation
Remarks
KEY TEST
{
SP-PHONE
}
LED lights when all KEY except
{
MUTE
}
key are pressed.
When
{
MUTE
}
key is pressed at the last, 4 beeps are heard and KEY TEST
is finished.
Fixed Message
replay
An English fixed message is reproduced at once.
DTMF (#) Send
DTMF (#) is sent to the line.
Dial Pulse (0)
Dial Pulse (O) is sent to the line.
DTMF (0) Send
DTMF (O) is sent to the line.
LED TEST
Each time you press the
{
STOP
}
key,
{
SP-PHONE
}
LED and LCD backlight turns on sequentially.
LCD TEST
{
STOP
}
key is pressed then Test pattern 1 is displayed on the LCD.
Whenever
{
STOP
}
key is pressed, four patterns are repeated.
95
05
94
07
09
87
89
Refer to the following procedures for the Test Mode operation of the Base Unit.
Refer to the following procedures for the Test Mode operation of the Cordless Handset.
Item
Remarks
LCD/LED TEST
Display Software
version
A soft version and the Sum value of the cordless handsest are displayed.
VER>JB**** SUM>****
Refer to
registered
information.
Press Navigator key down then following information is displayed. PSID,
CSID, Baseset code and PS-No.
Press Navigator key down or up then LCD contrast can be adjusted.
Press centre of soft keys then new data is set.
Test mode end
(To the usually
state.)
TESTMODE is finished, and it returns to the ordinary mode.
To enter Test Mode, Press
{C}
{i}
[7] [#] keys simultaneously while in stand by mode, then "TEST MODE" is
displayed.
KEY TEST
LCD Contrast
adjustment
[0] [0] [#]
[1] [2] [#]
[0] [3] [#]
[0] [1] [#]
[0] [7] [#]
[0] [2] [#]
Key operation
The display pattern of the LCD changes if centre of soft keys is pressed.
Press
{i}
then LCD/LED TEST is finished.
All keys are pressed and when
{i}
key is pressed OK is displayed in the
end.
