Note when setting up
Note for connections
R
The AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
R
The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become
disconnected.
During a power failure
R
The unit will not work during a power
failure. We recommend connecting a
corded-type telephone (without AC adaptor)
to the same telephone line or to the same
telephone line jack using a Panasonic
T-adaptor (page 4).
Note for battery installation
R
Use the supplied rechargeable batteries.
For replacement, we recommend using the
Panasonic rechargeable batteries noted on
page 4, 6.
R
Wipe the battery ends (
,
) with a dry
cloth.
R
Avoid touching the battery ends (
,
)
or the unit contacts.
Note for battery charging
R
It is normal for the handset to feel warm
during charging.
R
Clean the charge contacts of the handset,
base unit, and charger with a soft and dry
cloth once a month. Before cleaning the
unit, disconnect from power outlets and any
telephone line cords. Clean more often if
the unit is exposed to grease, dust, or high
humidity.
Battery level
Icon
Battery level
High
Medium
Low
Needs charging.
Panasonic Ni-MH battery
performance (supplied batteries)
Operation
Operating time
In continuous use
10 hours max.
Not in use (standby)
6 days max.
*1 If eco mode is on.
Note:
R
Actual battery performance depends on
usage and ambient environment.
R
Even after the batteries are fully charged,
the handset can be left on the base unit or
charger without any ill effect on the
batteries.
R
The battery level may not be displayed
correctly after you replace the batteries. In
this case, place the handset on the base
unit or charger and let it charge for at least
7 hours.
Intelligent eco mode
This feature automatically reduces handset
power consumption by suppressing handset
transmission power when the handset is close
to the base unit.
R
When this feature is activated,
“
ECO
”
is
displayed.
R
Eco mode is turned off when the clarity
booster is activated (page 15).
10
For assistance, please visit http://www.panasonic.com/help
Getting Started
PNQX6299ZA_0628_v0.1.2.pdf 10
2013/06/28 16:49:35