–
5
–
Quick troubleshooting
Lift up the handset from the base unit
or charger.
Press
{C}
(TALK) at the handset,
then check if the display shows
“
Talk
”.
Press
{s}
(SP-PHONE),
then check if the dial
tone is heard from the
speaker on the back.
No dial tone
Dial tone is heard.
“
No link to base.
Move closer to
base, try again.
”
is displayed.
“
Talk
” is
displayed.
Check the telephone
cord is properly
connected to both
the base unit and
telephone jack on
the wall.
Try remedy for
1
on previous page.
Your telephone may
need service when
only back speaker
provides a dial tone.
2
No dial tone is heard from handset.
Your telephone may need service.
Please visit
http://www.panasonic.com/phonehelp
for further
troubleshooting.
Still no dial tone
{C}
Talk
K
Flash
{s}
No link to base.
Move closer to
base, try again.
TG2631_2632_QG(e).fm Page 5 Monday, December 12, 2005 2:05 PM