Panasonic KX-TG2584 Скачать руководство пользователя страница 85

Страница: 85 / 96

“

For assistance, please call: 1-800-211-PANA(7262)

Useful Information

Problem

You cannot operate the
answering system from a
touch tone phone.

You cannot operate the
answering system with the
cordless handset.

While recording a greeting
message, the unit starts to
ring and stops recording.

During playback, the unit
starts to ring and stops
playback.

The base unit does not
display the name and/or
number of the caller whose
message is being played.

Cause and Remedy

≥

Make sure you enter the correct remote
code.

≥

The answering system may not respond
if the tones are too short to activate the
unit. Press each button firmly.

≥

The answering system is off. Turn it on
(p. 71).

≥

Someone is operating the answering
system.

≥

You are too far from the base unit.
Move closer to the base unit.

≥

The unit is recording a message.
To answer the call, press

≥

To answer the call, press

(DIGITAL\SP-PHONE)

, lift the handset or

press

. Start again from the

beginning after hanging up.

≥

To answer the call, press

(DIGITAL\SP-PHONE)

, lift the handset or

press .

≥

If the caller is not stored in the Caller
List, the base unit will not display the
caller’s information.

Problem

The unit does not work.

Cause and Remedy

≥

Check the settings (p. 10–16).

≥

Charge the battery fully (p. 11).

≥

Clean the charge contacts and charge
again (p. 12).

≥

Install the battery properly (p. 77).

≥

Place the cordless handset on the charger
and unplug the AC adaptor of the base
unit to reset. Plug in, and try again.

General

Содержание KX-TG2584

































































































Результаты поиска

Содержание KX-TG2584

Отзывы:

Похожие инструкции для KX-TG2584

Бренды по названию

Популярные бренды

Panasonic KX-TG2584, Руководство по эксплуатации

Результаты поиска

Содержание KX-TG2584

Отзывы:

Похожие инструкции для KX-TG2584

Бренды по названию

Популярные бренды